LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 350L FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (2 Of 2) >> Hood >> Disassembly [09/2015 - ] >> Procedure

Disassembly [09/2015 - ]: Procedure

  1. REMOVE HOOD TO RADIATOR SUPPORT SEAL 
    1. Using a clip remover, disengage the 10 hood to radiator support seal clips to remove the hood to radiator support seal.
      GTY625839Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 10 hood to radiator support seal clips from the hood to radiator support seal.
  2. REMOVE HOOD INSULATOR 
    1. Using a clip remover, remove the 8 hood insulator clips and hood insulator.
      GTY675437Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE WASHER NOZZLE SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  4. DISCONNECT WASHER HOSE ASSEMBLY 
    1. Disengage the 5 clamps and disconnect the washer hose assembly.
      GTY667974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE HOOD SUPPORT ASSEMBLY LH 

    See step  3

  6. REMOVE HOOD STAY BRACKET LH 

    See step  5

  7. REMOVE HOOD SUPPORT ASSEMBLY RH 

    HINT: 

    Use the same procedure as for the LH side.

  8. REMOVE HOOD STAY BRACKET RH 

    HINT: 

    Use the same procedure as for the LH side.

scientia non olet · About LEMON Manuals