LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RX 350 Base, AWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission Control System - Service Information >> PCV Valve >> Removal [09/2015 - ] >> Procedure

Removal [09/2015 - ]: Procedure

  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 23 [09/2015 - 08/2016] , or refer to PROCEDURE - Step 23 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 23 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 25 [08/2019 - ]

  2. DISCONNECT VENTILATION HOSE 
    1. Slide the clip and disconnect the ventilation hose from the PCV valve (ventilation valve sub-assembly).
      GTY680827Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE PCV VALVE (VENTILATION VALVE SUB-ASSEMBLY) 
    1. Using a 22 mm deep socket wrench, remove the PCV valve (ventilation valve sub-assembly) from the cylinder head cover LH sub-assembly.
      GTY650257Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals