LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> RC 350 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Pre-Collision System Warning Buzzer - Service Information >> Pre-Collision System Warning Buzzer >> Removal [09/2014 - ] >> Procedure

Removal [09/2014 - ]: Procedure

  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 9 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 9 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 9 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 9 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 9 [10/2022 - ]

  2. DISCONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 10 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 10 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 10 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 10 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 10 [10/2022 - ]

  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 11 [09/2014 - 11/2017] , or refer to PROCEDURE - Step 11 [11/2017 - 10/2018] , or refer to PROCEDURE - Step 11 [10/2018 - 11/2019] , or refer to PROCEDURE - Step 11 [11/2019 - 10/2022] , or refer to PROCEDURE - Step 11 [10/2022 - ]

  4. REMOVE SKID CONTROL BUZZER ASSEMBLY 
    1. Disengage the clamp.
      GTY464627Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect the connector to remove the skid control buzzer assembly.
scientia non olet · About LEMON Manuals