LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> NX 300h >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Except 8 Speakers) - Circuit Tests & Symptom Tests >> AUDIO AND VISUAL SYSTEM (except 8 Speakers) >> Illumination for Panel Switch does not Come on with Tail Switch ON [10/2014 - 09/2017] >> Procedure

Illumination for Panel Switch does not Come on with Tail Switch ON [10/2014 - 09/2017]: Procedure

  1. CHECK VEHICLE SIGNAL (OPERATION CHECK) 
    1. Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.
      GTY325562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Refer to OPERATION CHECK [10/2014 - 09/2017]

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK

      Light Control Switch Display
      Tail or head ON
      Off OFF

      HINT: 

      This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

      Result

      Proceed to
      OK
      NG

    Result: 

    OK 

    REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [10/2014 - 09/2017] 

    Result: 

    NG 

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE. Refer to  PROBLEM SYMPTOMS TABLE [10/2014 - 09/2016]  , or refer to  PROBLEM SYMPTOMS TABLE [09/2016 - 09/2017]