LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> NX 300 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Triple Beam Headlight) - Diagnostic Codes & Symptom Tests >> LIGHTING SYSTEM (For Triple Beam Headlight) >> DTC B242C: Right Headlight ECU Malfunction; DTC B242D: Left Headlight ECU Malfunction [10/2014 - 09/2017] >> Procedure

DTC B242C: Right Headlight ECU Malfunction; DTC B242D: Left Headlight ECU Malfunction [10/2014 - 09/2017]: Procedure

  1. CLEAR DTC 
    1. Clear the DTCs.

      Refer to DTC CHECK / CLEAR [10/2014 - 09/2017]

      Body Electrical > HL AutoLeveling > Clear DTCs 

      Result

      Proceed to
      NEXT

    Result: 

    NEXT 

    See step  2

  2. CHECK FOR DTC 
    1. Turn the engine switch on (IG).
    2. Check for DTCs.

      Refer to DTC CHECK / CLEAR [10/2014 - 09/2017]

      Body Electrical > HL AutoLeveling > Trouble Codes 

      Result

      Proceed to
      DTCs B242C and B242D are not output
      DTC B242C is output
      DTC B242D is output

    Result: 

    DTCs B242C and B242D are not output 

    USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2014 - 09/2017] 

    Result: 

    DTC B242C is output 

    REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY RH. Refer to  REMOVAL [10/2014 - 09/2017] 

    Result: 

    DTC B242D is output 

    REPLACE HEADLIGHT LIGHT CONTROL ECU SUB-ASSEMBLY LH. Refer to  REMOVAL [10/2014 - 09/2017]