LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> LS 500h RWD >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension System (Rear) - Service Information (1 Of 2) >> Rear Shock Absorber >> Disposal [10/2017 - 10/2020] >> Procedure

Disposal [10/2017 - 10/2020]: Procedure

  1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY 
    WARNING:

    Always use proper safety equipment and be careful when drilling because shards of metal may fly about.

    GTY596062Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    HINT: 

    The gas is colorless, odorless and non-poisonous.

    1. Fully extend the front shock absorber assembly.
    2. Using a drill, make a hole in the cylinder between (A) and (B) shown in the illustration to discharge the gas inside.
      GTY781630Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals