LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> LS 500h RWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) - Service Information (1 Of 4) >> Hood Lock Control Cable Assembly >> Removal [11/2021 - 10/2023] >> Caution / Notice / Hint

Caution / Notice / Hint

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the hood lock control cable assembly removal/installation are shown below.

Replaced Part or Performed Procedures Necessary Procedures Effect/Inoperative Function When Necessary Procedures are not Performed Link
Front bumper assembly (Including removal and installation) Front television camera view adjustment Panoramic view monitor system w/ Advanced Park:
Refer to CALIBRATION [11/2021 - 10/2022] , or refer to CALIBRATION [10/2022 - 10/2023]
w/o Advanced Park:
Refer to CALIBRATION [11/2021 - 10/2022] , or refer to CALIBRATION [10/2022 - 10/2023]
w/ Advanced Drive: 
  1. Adjust front LiDAR advanced drive sensor assembly
  • Advanced drive system
  • Front LiDAR system
 Refer to ADJUSTMENT [11/2021 - ]
scientia non olet · About LEMON Manuals