LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> LS 500h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Lidar System - Service Information (1 Of 2)) >> LiDAR SENSOR CLEANER NOZZLE (for Front Side) >> Removal [11/2021 - 10/2022] >> Procedure

Removal [11/2021 - 10/2022]: Procedure

WARNING: This page is about a different car, the 2024 Lexus LS 500h, 2023 Lexus LS 500h, and 2022 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER ASSEMBLY 

    Refer to REMOVAL [11/2021 - 10/2022]

  2. REMOVE FRONT LIDAR CLEANER COVER 

    See step  1

  3. REMOVE FRONT LIDAR CLEANER NOZZLE 
    1. Detach the claw and disconnect the washer hose.
      GTY1085596Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Disconnect in this Direction
    2. Remove the clamp and front LiDAR cleaner nozzle.
      GTY1085578Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
scientia non olet · About LEMON Manuals