LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> LS 500h AWD >> Repair and Diagnosis >> Body & Frame >> Windows >> Window / Glass - Service Information (1 Of 2) >> Front Passenger Side Power Window Switch >> Removal [10/2017 - ] >> Procedure

Removal [10/2017 - ]: Procedure

  1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY 
    1. Apply protective tape to the front door armrest assembly as shown in the illustration.
      GTY966232Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Protective Tape
    2. Raise the power window regulator switch assembly using the moulding remover D as shown in the illustration.
      GTY965995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Move in this Direction
      NOTE:

      Do not damage the armrest.

    3. While holding the moulding remover D, detach the claw using the moulding remover E as shown in the illustration.
      GTY965903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Insert Moulding Remover E Here - -
      NOTE:

      Do not damage the armrest.

    4. While holding the moulding remover D, detach the claw using the moulding remover E as shown in the illustration.
      GTY966094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Insert Moulding Remover E Here - -
      NOTE:

      Do not damage the armrest.

    5. Disconnect the connector to remove the power window regulator switch assembly.
    6. Using moulding remover A, detach the claw and remove the power window regulator switch assembly from the front door armrest upper base panel.
      GTY827407Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals