Removal [10/2020 - 10/2022]: Procedure

PRECAUTION
NOTE:
- After the engine switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.
  Refer to BEFORE DISCONNECTING BATTERY [10/2020 - 10/2022]
- This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
  Refer to PRECAUTION [10/2020 - 10/2023]
REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
Refer to PROCEDURE - Step 25
REMOVE LUGGAGE COMPARTMENT FLOOR MAT
Refer to PROCEDURE - Step 24
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
Refer to REMOVAL [10/2020 - 10/2022]
REMOVE ENGINE ASSEMBLY WITH TRANSMISSION
Refer to REMOVAL [10/2020 - 10/2022]
REMOVE CONVERTER ASSEMBLY RH
Refer to PROCEDURE - Step 8
DISCONNECT FRONT FRAME ASSEMBLY (for AWD)
Refer to PROCEDURE - Step 141
REMOVE FRONT ENGINE MOUNTING INSULATOR (for AWD)
Refer to PROCEDURE - Step 142
REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH (for AWD)
Refer to PROCEDURE - Step 143