- REMOVE ENGINE ASSEMBLY
Refer to REMOVAL [09/2018 - 10/2020]
, or refer to REMOVAL [10/2020 - 10/2022]
, or refer to REMOVAL [10/2022 - 10/2023]
, or refer to REMOVAL [10/2023 - ]
- REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH (for 2WD)
Refer to REMOVAL [09/2018 - 10/2020]
, or refer to REMOVAL [10/2020 - 10/2022]
, or refer to REMOVAL [10/2022 - 10/2023]
, or refer to REMOVAL [10/2023 - ]
- REMOVE CONVERTER ASSEMBLY RH
Refer to REMOVAL [12/2017 - ]
- REMOVE CONVERTER ASSEMBLY LH
Refer to REMOVAL [12/2017 - ]
- REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
- for 2WD:
Remove the bolt and engine oil level dipstick guide.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- for AWD:
Remove the bolt and engine oil level dipstick guide.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the O-ring from the engine oil level dipstick guide.
- DISCONNECT NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
- Slide the 2 clamps and disconnect the No. 1 turbo water hose and No. 2 turbo water hose from the No. 1 turbo water pipe sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- DISCONNECT NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
- Slide the 2 clamps and disconnect the No. 3 turbo water hose and No. 4 turbo water hose from the No. 2 turbo water pipe sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- DISCONNECT NO. 1 PCV TUBE
- Remove the 2 bolts to disconnect the No. 1 PCV tube from the No. 1 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket from the No. 1 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- DISCONNECT NO. 2 PCV TUBE
- Remove the 2 bolts to disconnect the No. 2 PCV tube from the No. 2 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket from the No. 2 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- DISCONNECT VACUUM HOSE
- for Bank 1:
Detach the clamp to disconnect the vacuum hose from the No. 1 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
for Bank 2:
Detach the 2 clamps to disconnect the vacuum hose from the No. 2 air inlet duct sub-assembly.
- REMOVE NO. 1 AIR HOSE
- for Bank 1:
Loosen the clamp to remove the No. 1 air hose from the No. 1 compressor outlet elbow.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Loosen the clamp to remove the No. 2 air hose from the No. 1 compressor outlet elbow.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 TURBO INSULATOR
- Remove the 2 bolts, nut and No. 1 turbo insulator.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 3 TURBO INSULATOR
- Remove the 2 bolts, nut and No. 3 turbo insulator.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 TURBOCHARGER SUB-ASSEMBLY
- Remove the bolt from the No. 1 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 3 bolts and turbo water pipe stay.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 2 bolts and union bolt to disconnect the turbo oil inlet pipe sub-assembly LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket from the union bolt.
- Remove the gasket from the turbo oil inlet pipe sub-assembly LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 3 nuts and No. 1 turbocharger sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket from the cylinder head sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 TURBOCHARGER SUB-ASSEMBLY
- Remove the bolt from the No. 2 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the 2 bolts and union bolt to disconnect the turbo oil inlet pipe sub-assembly RH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket from the union bolt.
- Remove the gasket from the turbo oil inlet pipe sub-assembly RH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the bolt, 3 nuts and No. 2 turbocharger sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket from the cylinder head sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 5 TURBO INSULATOR
- Remove the bolt and No. 5 turbo insulator from the cylinder head sub-assembly LH.
- REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY RH
- Remove the 2 nuts and turbo oil inlet pipe sub-assembly RH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE TURBO OIL INLET PIPE SUB-ASSEMBLY LH
- Remove the 2 nuts and turbo oil inlet pipe sub-assembly LH.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 COMPRESSOR OUTLET ELBOW
- Remove the 2 bolts and No. 1 compressor outlet elbow.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 COMPRESSOR OUTLET ELBOW
- Remove the 2 bolts and No. 2 compressor outlet elbow.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 AIR INLET DUCT SUB-ASSEMBLY
- Remove the 2 bolts and No. 1 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 AIR INLET DUCT SUB-ASSEMBLY
- Remove the 2 bolts and No. 2 air inlet duct sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 TURBO WATER PIPE SUB-ASSEMBLY
- Remove the 3 bolts and No. 1 turbo water pipe sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 2 TURBO WATER PIPE SUB-ASSEMBLY
- Remove the 3 bolts and No. 2 turbo water pipe sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- Remove the gasket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 4 ENGINE COVER
- Remove the No. 4 engine cover from the cylinder block sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 5 ENGINE COVER
- Remove the No. 5 engine cover from the cylinder block sub-assembly.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|
- REMOVE NO. 1 TURBO INSULATOR STAY
- Remove the 2 bolts and No. 1 turbo insulator stay.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
|