Removal [12/2017 - ]: Procedure
- DRAIN ENGINE COOLANT
Refer to PROCEDURE - Step 8
- DRAIN COOLANT (for Intercooler)
Refer to PROCEDURE - Step 4
- REMOVE INTERCOOLER COOLING RADIATOR ASSEMBLY
- Remove the radiator assembly.
Refer to REMOVAL [12/2017 - ]
- Detach the claw and remove the rear radiator side air guide plate LH.
- Slide the clips and disconnect the intercooler water hose from the intercooler cooling radiator assembly.
- Detach the clamp.
- Remove the 2 bolts and intercooler cooling water hose assembly.
- Detach the claws.
- While lifting the intercooler cooling radiator assembly, detach the guides and remove the intercooler cooling radiator assembly.
- Remove the radiator assembly.
- REMOVE SUB RADIATOR ASSEMBLY
- Remove the front bumper assembly.
- for Sport Package: (Refer to REMOVAL [12/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020] , or refer to REMOVAL [10/2020 - 11/2021] , or refer to REMOVAL [11/2021 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ] )
- except Sport Package: (Refer to REMOVAL [12/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020] , or refer to REMOVAL [10/2020 - 11/2021] , or refer to REMOVAL [11/2021 - 10/2022] , or refer to REMOVAL [10/2022 - 10/2023] , or refer to REMOVAL [10/2023 - ] )
- Remove the 2 bolts.
- Detach the claw and remove the No. 1 sub-radiator duct.
- Slide the clips and disconnect the No. 1 sub-radiator hose and No. 6 sub-radiator hose from the sub radiator assembly.
- Remove the 3 nuts and sub radiator assembly.
- Remove the nut A and clip from the No. 3 radiator bracket.
*a Nut A *b Nut B - Detach the clamp.
- Remove the 3 nuts B and No. 3 radiator bracket.
- Detach the claws, clamp and remove the No. 2 sub-radiator duct from the No. 1 sub-radiator bracket.
- Remove the front bumper assembly.