LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> LS 500 Base, RWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter / Gauge / Display - Service Information >> Clock >> Removal [10/2020 - ] >> Procedure

Removal [10/2020 - ]: Procedure

  1. REMOVE MULTI-DISPLAY 

    Refer to REMOVAL [10/2020 - 10/2022] , or refer to REMOVAL [10/2022 - ]

  2. REMOVE MULTI-MEDIA MODULE COVER 

    Refer to PROCEDURE - Step 1 [10/2020 - 10/2022] , or refer to PROCEDURE - Step 1 [10/2022 - ]

  3. REMOVE CLOCK ASSEMBLY 
    NOTE:

    When removing the clock assembly, make sure that no dust, etc., enters the inside of the multi-display.

    1. GTY970962Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
      Protective Tape

      Using a thin-bladed screwdriver, detach the claw and remove the clock assembly as shown in the illustration.

      HINT: 

      Tape the thin-bladed screwdriver tip before use.

scientia non olet · About LEMON Manuals