Installation [10/2022 - ]: Procedure

1. Attach the guide to temporarily install the multi-display controller bracket A.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Do not touch the multi-display controller bracket A to the No. 1 instrument panel garnish sub-assembly.

2. Install the multi-display controller bracket A with the 3 bolts.

1. Connect each connector to attach the clamp.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Attach the guide and clip to temporarily install the multi-display assembly as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Install in this Direction

   NOTE:

   • Do not subject the multi-display assembly to excessive force or damage it.
   • Be careful that the cushion does not interfere with the No. 1 instrument panel garnish sub-assembly.
3. Install the multi-display assembly with the 2 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Refer to PROCEDURE - Step 22 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 22 [10/2023 - ]

Refer to PROCEDURE - Step 25 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 25 [10/2023 - ]

Refer to PROCEDURE - Step 26 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 26 [10/2023 - ]

Refer to PROCEDURE - Step 30 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 30 [10/2023 - ]

Refer to PROCEDURE - Step 24 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 24 [10/2023 - ]

Refer to PROCEDURE - Step 32 [10/2022 - 10/2023] , or refer to PROCEDURE - Step 32 [10/2023 - ]

Refer to PROCEDURE - Step 9

Refer to PROCEDURE - Step 10