Caution / Notice / Hint
NOTE:
- When replacing the skid control ECU (brake actuator assembly), perform zero point calibration and store system information.
Refer to CALIBRATION [12/2017 - 09/2018]
- Inspect the fuses for circuits related to this system before performing the following procedure.
HINT:
When C1241 and/or C1417 is output together with C146E and/or C146F, inspect and repair the trouble areas indicated by C1241 and/or C1417 first.
for C1241: Refer to DTC C1241: Low Power Supply Voltage Malfunction [12/2017 - 09/2018]
for C1417: Refer to DTC C1417: High Power Supply Voltage Malfunction [12/2017 - 09/2018]