LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> LC 500 >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System - Service Information (Coupe) >> Brake Pedal Stroke Sensor >> Removal [05/2023 - ] >> Procedure

Removal [05/2023 - ]: Procedure

  1. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY 

    Refer to REMOVAL [05/2023 - ]

  2. REMOVE STEERING ACTUATOR ASSEMBLY (w/ VGRS) 

    Refer to REMOVAL [05/2023 - ]

  3. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY 
    1. Disconnect the connector from the brake pedal stroke sensor assembly.
      GTY790387Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 nuts and brake pedal stroke sensor assembly from the brake pedal support assembly.
      NOTE:
      • Do not drop the brake pedal stroke sensor assembly.
      • If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.
scientia non olet · About LEMON Manuals