Customize Parameters [05/2023 - ]

CUSTOMIZE METER / GAUGE SYSTEM

Customizing with the Techstream.

Connect the Techstream to the DLC3.
Turn the engine switch on (IG).
Turn the Techstream on.
Enter the following menus: Customize Setting / Warning or Display.

Select the setting by referring to the table below.

NOTE:

Be sure to record the current value before customizing.

Warning

Tester Display	Description	Default	Setting	ECU
Reverse Buzzer	Function to change the reverse warning buzzer type	Continual	00:Continual, 01:Single	Combination meter assembly
Flasher Sound Volume Adjustment	Function to change the flasher sound volume	Small	10:Large, 00:Medium, 01:Small	Combination meter assembly
Lane Change Flashing Times Setting	Function to change the lane change flashing times	3	000:OFF, 001:3, 010:4, 011:5, 100:6, 101:7	Combination meter assembly

Display

Tester Display	Description	Default	Setting	ECU
ECO Drive Indicator Zone	Function to change the ECO Drive Indicator Zone	ON	0:OFF, 1:ON	Combination meter assembly
ECO Drive Indicator Light	Function to change the ECO Drive Indicator light	ON	0:OFF, 1:ON	Combination meter assembly
ODO Display Time After IG OFF Setting	Function to change the ODO display time after the engine switch is turned off	30s	00:30s, 01:60s, 10:600s, 11:OFF	Combination meter assembly

Customizing with the combination meter assembly

Turn the engine switch on (IG).
Enter the following menus: Settings.

Select the setting by referring to the table below.

NOTE:

Be sure to record the current value before customizing.

SETTINGS

Combination Meter Assembly Display	Description	Default	Setting	ECU
Language	Function to change the language on the display	English	English (Default) French Spanish	Combination meter assembly
Units	Function to change the units on the display	miles (MPG)	km (km/L), km (L/100 km), miles (MPG)	Combination meter assembly
Switch Settings	Function to change the screen assigned to the TOP button on the steering pad switch assembly	-	-	Combination meter assembly
Drive Info 1	Function to change the item to be displayed on Drive Info 1	Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) Total Average Fuel Consumption Between Reset Operations	Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) Total Average Fuel Consumption Between Reset Operations Average Fuel Consumption After Engine Start-up Average Fuel Consumption After Refueling Total Average Vehicle Speed Between Reset Operations Average Vehicle Speed After Engine Start-up Cruising Range After Engine Start-up Total Elapsed Time Between Reset Operations Elapsed Time After Engine Start-up Cruising Range Blank	Combination meter assembly
Drive Info 2	Function to change the item to be displayed on Drive Info 2	Cruising Range Total Average Vehicle Speed Between Reset Operations	Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) Total Average Fuel Consumption Between Reset Operations Average Fuel Consumption After Engine Start-up Average Fuel Consumption After Refueling Total Average Vehicle Speed Between Reset Operations Average Vehicle Speed After Engine Start-up Cruising Range After Engine Start-up Total Elapsed Time Between Reset Operations Elapsed Time After Engine Start-up Cruising Range Blank	Combination meter assembly
Interrupt Display	Function to change the interrupt display setting of each item	ON	ON or OFF	Combination meter assembly
Ring Position Memory	Function to change the ring position memory on/off	OFF	ON or OFF	Combination meter assembly
ECO Driving Indicator	Function to turn on/off the ECO driving indicator light	ON	ON or OFF	Combination meter assembly
REV Indicator	Function to turn on/off the REV indicator light	OFF	ON or OFF	Combination meter assembly
REV Peak	Function to turn on/off the REV peek function	OFF	ON or OFF	Combination meter assembly
Initialization	The setting items can be initialized	-	-	Combination meter assembly