Installation [05/2023 - ]: Procedure

INSTALL LIGHT CONTROL RHEOSTAT (TRIP SWITCH)

Attach the claws to install the light control rheostat (trip switch).

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Install in this Direction

INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
Refer to INSTALLATION [05/2023 - ]
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Refer to INSTALLATION [05/2023 - ]
INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Refer to INSTALLATION [05/2023 - ]
INSTALL FRONT DOOR NO. 2 OPENING TRIM COVER LH
Refer to INSTALLATION [05/2023 - ]
INSTALL FRONT DOOR OPENING TRIM COVER LH
Refer to INSTALLATION [05/2023 - ]
INSTALL FRONT DOOR SCUFF PLATE LH
Refer to INSTALLATION [05/2023 - ]
INSTALL BOX PANEL SUB-ASSEMBLY
Refer to INSTALLATION [05/2023 - ]
INSTALL UPPER CONSOLE BOX
Refer to INSTALLATION [05/2023 - ]
INSTALL SHIFTING HOLE COVER ASSEMBLY
Refer to INSTALLATION [05/2023 - ]
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to INSTALLATION [03/2017 - ]
INSTALL RADIO REMOTE TUNING SWITCH ASSEMBLY
Refer to PROCEDURE - Step 11
INSTALL CONSOLE PLATE
Refer to PROCEDURE - Step 12