Terminals Of Ecu [10/2016 - 10/2017]
- COMBINATION METER ASSEMBLY
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Measure the voltage and resistance and check of pulses according to the value(s) in the table below.
Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition K3-2 (MSM+) - Body ground L - Body ground Steering pad switch assembly signal Engine switch on (IG), enter, top and back switches on steering pad switch assembly not pushed 4.8 to 5.2 V K3-3 (MSTI) - Body ground P - Body ground Steering pad switch assembly signal Engine switch on (IG), up, down, right and left switches on steering pad switch assembly not pushed 4.8 to 5.2 V K3-4 (ODO) - Body ground L - Body ground ODO/TRIP switch signal Engine switch on (IG), ODO/TRIP switch not pushed 4 to 6 V Engine switch on (IG), ODO/TRIP switch pushed Below 1 V K3-8 (CHG-) - Body ground*3 L - Body ground Charge warning light signal Engine switch on (IG), charge warning light off 11 to 14 V Engine switch on (IG), charge warning light on Below 1 V K3-9 (S) - Body ground*3 LG - Body ground Engine oil pressure signal Idling 11 to 14 V Engine switch on (IG) Below 1 V K3-12 (RRSB) - Body ground R - Body ground Rear seat belt indicator light RH signal Engine switch on (IG), rear seat belt warning light RH off 11 to 14 V Engine switch on (IG), rear seat belt warning light RH on Below 1 V K3-13 (RCSB) - Body ground W - Body ground Rear seat belt indicator light center signal Engine switch on (IG), rear seat belt warning light center off 11 to 14 V Engine switch on (IG), rear seat belt warning light center on Below 1 V K3-14 (RLSB) - Body ground G - Body ground Rear seat belt indicator light LH signal Engine switch on (IG), rear seat belt warning light LH off 11 to 14 V Engine switch on (IG), rear seat belt warning light LH on Below 1 V K3-15 (OILW) - Body ground GR - Body ground Engine oil level signal Engine switch on (IG), engine oil level not low 11 to 14 V Engine switch on (IG), engine oil level low Below 1 V K3-16 (WLVL) - Body ground V - Body ground Washer fluid level signal Engine switch on (IG), washer fluid level not low 11 to 14 V Engine switch on (IG), washer fluid level low Below 1 V K3-17 (SW) - Body ground LG - Body ground Brake fluid level signal Engine switch on (IG), brake fluid level not low 11 to 14 V Engine switch on (IG), brake fluid level low Below 1 V K3-19 (+S) - Body ground L - Body ground Speed signal for other systems (Output) Engine switch on (IG), wheel being rotated Pulse generation (See waveform 1) K3-20 (SI) - Body ground V - Body ground Speed signal for other system (Input) Engine switch on (IG), wheel being rotated Pulse generation (See waveform 1) K3-21 (IG+) - Body ground B - Body ground Engine switch signal Engine switch off Below 1 V Engine switch on (IG) 11 to 14 V K3-22 (B) - Body ground LG - Body ground Battery Always 11 to 14 V K3-23 (VCM) - Body ground*2 SB - Body ground Vacuum warning switch signal Engine started, vacuum warning switch off (brake warning light off) 11 to 14 V Engine started, vacuum warning switch on (brake warning light on) Below 1 V K3-25 (TR) - Body ground P - Body ground Trip switch signal Engine switch on (IG), up switch and down switch of trip switch not pushed 4 to 6 V Engine switch on (IG), up switch or down switch of trip switch pushed Below 1 V K3-26 (SW3) - Body ground W - Body ground Ground for trip switch Always Below 1 Ω K3-27 (FR) - K3-28 (FE) SB - GR Fuel level signal Engine switch on (IG), fuel level warning off Below 1 V Engine switch on (IG), fuel level warning on 4.5 to 9 V K3-29 (CANH) - Body ground LG - Body ground CAN communication line - - K3-30 (CANL) - Body ground B - Body ground CAN communication line - - K3-31 (ES) - Body ground BR - Body ground Ground Always Below 1 Ω K3-35 (RLMT) - Body ground L - Body ground Rear seat belt buckle switch LH signal Engine switch on (IG), rear seat belt LH unfastened Below 1 V Engine switch on (IG), rear seat belt LH fastened 11 to 14 V K3-36 (RCMT) - Body ground W - Body ground Rear seat belt buckle switch center signal Engine switch on (IG), rear seat belt center unfastened Below 1 V Engine switch on (IG), rear seat belt center fastened 11 to 14 V K3-37 (RRMT) - Body ground R - Body ground Rear seat belt buckle switch RH signal Engine switch on (IG), rear seat belt RH unfastened Below 1 V Engine switch on (IG), rear seat belt RH fastened 11 to 14 V K3-39 (ILL-) - Body ground BE - Body ground Illumination signal Headlight dimmer switch off Below 1 V Headlight dimmer switch in tail or head position Pulse generation K3-40 (EP) - Body ground BR - Body ground Ground Always Below 1 Ω K4-1 (B) - Body ground B - Body ground Battery Always 11 to 14 V K4-2 (HZSW) - Body ground W - Body ground Hazard warning signal switch signal (Input) Engine switch on (IG), hazard warning signal switch not pressed 11 to 14 V Engine switch on (IG), hazard warning signal switch pressed Below 1 V K4-3 (ER) - Body ground P - Body ground RH turn indicator light signal (Input) Engine switch on (IG), RH turn signal switch off 11 to 14 V Engine switch on (IG), RH turn signal switch on Below 1 V K4-4 (EL) - Body ground GR - Body ground LH turn indicator light signal (Input) Engine switch on (IG), LH turn signal switch off 11 to 14 V Engine switch on (IG), LH turn signal switch on Below 1 V K4-5 (TRNR) - Body ground R - Body ground Rear turn signal light RH signal Engine switch on (IG), RH turn indicator light off Below 1 V Engine switch on (IG), RH turn indicator light blinking 11 to 14 V ←→ Below 1 V K4-7 (LR) - Body ground R - Body ground Front and side turn signal light RH signal (Output) Engine switch on (IG), RH turn indicator light off Below 1 V Engine switch on (IG), RH turn indicator light blinking 11 to 14 V ←→ Below 1 V K4-9 (MSCL) - Body ground B - Body ground Local bus communication line - - K4-10 (MSCH) - Body ground R - Body ground Local bus communication line - - K4-11 (TRNL) - Body ground LG - Body ground Rear turn signal light LH signal Engine switch on (IG), LH turn indicator light off Below 1 V Engine switch on (IG), LH turn indicator light blinking 11 to 14 V ←→ Below 1 V K4-12 (HAZM) - Body ground B - Body ground Hazard warning signal switch signal (Output) Engine switch on (IG), hazard warning signal switch not pressed 11 to 14 V Engine switch on (IG), hazard warning signal switch pressed Below 1 V K4-13 (LL) - Body ground G - Body ground Front and side turn signal light LH signal (Output) Engine switch on (IG), LH turn indicator light off Below 1 V Engine switch on (IG), LH turn indicator light blinking 11 to 14 V ←→ Below 1 V K123-1 (GVIF) - Body ground*1 B - Body ground Video signal (Digital) - - - *1: w/ Navigation System
- *2: for 8AR-FTS
- *3: for 2GR-FSE
- Waveform 1 (Reference):
Item Condition Tool setting 5 V/DIV., 20 ms./DIV. Vehicle condition Engine switch on (IG), wheel being rotated HINT:
When the system is functioning normally, one wheel revolution generates 4 pulses. As the vehicle speed increases, the width indicated by (A) in the illustration narrows.
- Measure the voltage and resistance and check of pulses according to the value(s) in the table below.