LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> GX 460 Base >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Panels / Trim (Service Information) >> Front Console Box >> Removal [08/2021 - ] >> Procedure

Removal [08/2021 - ]: Procedure

  1. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 
    GTY462708Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the screw.
    2. Detach the 2 clips and 2 guides and remove the No. 1 instrument panel under cover sub-assembly.
    3. Disconnect each connector and detach each wire harness clamp.
  2. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY 
    GTY264696Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the screw.
    2. Detach the 3 clips and 2 guides and remove the No. 2 instrument panel under cover sub-assembly.
    3. Disconnect the foot light and detach the wire harness clamp.
  3. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 
    GTY1082943Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Detach the 12 clips and remove the instrument panel finish panel end LH.
  4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 
    GTY1083014Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Detach the 12 clips and remove the instrument panel finish panel end RH.
  5. REMOVE FRONT NO. 1 CONSOLE BOX INSERT 
    GTY257606Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Detach the 2 clips and guide and remove the front No. 1 console box insert.
  6. REMOVE FRONT NO. 2 CONSOLE BOX INSERT 
    GTY282328Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Detach the 2 clips and guide and remove the front No. 2 console box insert.
  7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    GTY1082945Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Twist the shift lever knob sub-assembly in the direction indicated by the arrow and remove it.
  8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY 
    GTY1082782Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Protective Tape
    1. Put protective tape around the upper console panel sub-assembly.
    2. Detach the 7 clips.
      GTY1082944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Move the upper console panel sub-assembly in the direction of the arrow to remove it.
    4. Disconnect each connector.
  9. REMOVE CONSOLE COIN BOX 
    1. Remove the console coin box.
  10. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY 
    GTY1083009Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Detach the 4 clips, 2 guides and 2 claws and remove the rear upper console panel sub-assembly.
  11. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY 
    1. Using a moulding remover, detach the 8 clips and remove the rear console end panel sub-assembly.
      GTY951150Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disconnect each connector and detach each wire harness clamp.
  12. REMOVE REAR CONSOLE BOX ASSEMBLY 
    GTY257618Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Remove the 2 screws and 4 bolts and rear console box assembly.
    2. Detach the wire harness clamp and disconnect each connector.
scientia non olet · About LEMON Manuals