LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> GX 460 Base >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Exterior) (Service Information) >> Hazard Warning Switch >> Removal [08/2021 - ] >> Procedure

Removal [08/2021 - ]: Procedure

  1. REMOVE MULTI-DISPLAY ASSEMBLY WITH BRACKET 

    (Refer to REMOVAL [08/2021 - ] )

  2. REMOVE HAZARD WARNING SIGNAL SWITCH ASSEMBLY 
    1. Disconnect the 4 connectors.
      GTY1083719Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Detach the clamp, claw and disconnect the No. 4 instrument panel wire so that the hazard warning signal switch assembly can be removed.
    3. Using a screwdriver, detach the 2 claws and remove the hazard warning signal switch assembly.
      GTY1083972Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Protective Tape

      HINT: 

      Tape the screwdriver tip before use.

scientia non olet · About LEMON Manuals