LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> GS F >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Panels / Trim - Service Information >> Front Console Box >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

  1. REMOVE INSTRUMENT CENTER CLUSTER FINISH PANEL SUB-ASSEMBLY 
    1. Disengage the clips and guide to remove the instrument center cluster finish panel sub-assembly as shown in the illustration.
      GTY626848Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Disconnect the connector.
  2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH 
    1. Disengage the clips and guides to remove the instrument panel finish panel end LH as shown in the illustration.
      GTY638136Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1)
      Remove in this Direction (2)
  3. REMOVE INSTRUMENT PANEL FINISH PANEL END RH 
    1. Disengage the clips and guides to remove the instrument panel finish panel end RH as shown in the illustration.
      GTY617422Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction (1)
      Remove in this Direction (2)
  4. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Disengage the claw to separate the shifting hole cover as shown in the illustration.
      GTY629015Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Downward
    2. Remove the shift lever knob sub-assembly as shown in the illustration.
      GTY679122Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
  5. REMOVE CONSOLE UPPER PANEL SUB-ASSEMBLY 
    1. Remove the 2 screws.
      GTY658383Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Disengage the clips to remove the console upper panel sub-assembly as shown in the illustration.
    3. Disconnect the connectors.
  6. REMOVE INSTRUMENT PANEL CUP HOLDER ASSEMBLY 
    1. Disengage the clips to remove the instrument panel cup holder assembly as shown in the illustration.
      GTY685632Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Disconnect the connectors.
  7. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY 

    Refer to PROCEDURE - Step 6

  8. REMOVE CONSOLE REAR END PANEL 
    1. Disengage the clips, claws and guides to remove the console rear end panel as shown in the illustration.
      GTY647017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction
    2. Disconnect the connector.
  9. REMOVE CONSOLE BOX ASSEMBLY 
    1. Disconnect the 2 connectors.
      GTY660249Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clamp
      *b Guide
    2. Disengage the clamp.
    3. Remove the 5 bolts.
    4. Remove the 2 screws.
    5. Disengage the guides to remove the console box assembly.
scientia non olet · About LEMON Manuals