LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> ES 350 >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System (Service Information) >> Multi-Display >> Removal (07/2015 -) >> Procedure

Removal (07/2015 -): Procedure

  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 25

  2. REMOVE MULTI-DISPLAY ASSEMBLY 
    1. Remove the 2 screws.
      GTY509366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull the multi-display assembly in the direction indicated by the arrow to disengage the 2 clips.
      GTY509368Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect each connector and remove the multi-display assembly.
scientia non olet · About LEMON Manuals