LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2018 >> ES 300h >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System (Service Information) >> Trip Switch >> Installation [07/2015 - ] >> Procedure

Installation [07/2015 - ]: Procedure

  1. INSTALL TRIP SWITCH 
    1. Engage the 2 claws to install the trip switch.
  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY 

    See step  2

  3. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column) 
    NOTE:

    Reset the auto away/return function setting to the previous condition by changing the customize parameter. Refer to CUSTOMIZE PARAMETERS [07/2015 - ]

scientia non olet · About LEMON Manuals