Removal [07/2015 - ]: Procedure

REMOVE NO. 2 FORWARD RECOGNITION COVER

Disengage the 2 claws and 2 guides and remove the No. 2 forward recognition cover as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

If these claws are disengaged separately, they may break. Insert a molding remover between them and pull it down to disengage the claws simultaneously.

REMOVE NO. 1 FORWARD RECOGNITION COVER

Disengage the 2 clips and 2 guides and remove the No. 1 forward recognition cover as shown in the illustration.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE:

To avoid damaging the guides, always slide the No. 1 forward recognition cover parallel to the windshield glass.

REMOVE FORWARD RECOGNITION LATCH

Disengage the 2 claws and 4 guides and remove the forward recognition latch as shown in the illustration.

REMOVE FORWARD RECOGNITION CAMERA

Disconnect the connector.

Disengage the 4 guides and remove the forward recognition camera as shown in the illustration.
NOTE:
- Do not pull the harness forcibly when disconnecting the connector.
- If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.
- If the forward recognition camera has been struck or dropped, replace it with a new one.
- Do not apply excessive force.