LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 350 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge System - Diagnostics - Introduction (4 Of 8) >> Meter / Gauge System >> Customize Parameters [09/2014 - ] >> Customize Parameters [09/2014 - ]

Customize Parameters [09/2014 - ]

  1. CUSTOMIZE METER / GAUGE SYSTEM 
    1. Customizing with the Techstream
      1. Connect the Techstream to the DLC3.
      2. Turn the engine switch on (IG).
      3. Turn the Techstream on.
      4. Enter the following menus: Customize Setting / Warning or Display.
      5. Select the setting by referring to the table below.
        NOTE:

        Be sure to record the current value before customizing.

        Warning 

        Tester Display Description Default Setting ECU
        Flasher Sound Volume Adjustment Function to change the flasher sound volume Medium 10:Large, 00:Medium, 01:Small Combination meter assembly

        Display 

        Tester Display Description Default Setting ECU
        ODO Display Time After IG OFF Setting Function to change the ODO display time after the engine switch is turned off 30s 00:30s, 01:60s, 10:600s, 11:OFF Combination meter assembly
scientia non olet · About LEMON Manuals