Caution / Notice / Hint
NOTE:
- When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
- The following troubleshooting procedure is based on the assumption that the SFI system is normal. Confirm that the SFI system is not malfunctioning before performing the following procedure.
for 8AR-FTS: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2017 - ]
for 2GR-FKS: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - ]