LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Engine Cooling System (2GR-FKS) - Service Information) >> Cooling Fan Motor >> On-Vehicle Inspection [11/2017 - ] >> Procedure

On-Vehicle Inspection [11/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK COOLING FAN MOTOR LH 
    1. Disconnect the cooling fan motor LH connector.
      GTY815621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Cooling Fan Motor LH)
    2. Check that the cooling fan motor LH operates smoothly when the battery is connected to the cooling fan motor LH connector.
    3. Measure the current while the cooling fan motor LH is operating.

      Standard Current

      Condition Specified Condition
      Battery voltage applied at 20°C (68°F) 10.7 to 17.0 A

      If the result is not as specified, replace the cooling fan motor LH.

    4. Connect the cooling fan motor LH connector.
  2. CHECK COOLING FAN MOTOR RH 
    1. Disconnect the cooling fan motor RH connector.
      GTY821102Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Cooling Fan Motor RH)
    2. Check that the cooling fan motor RH operates smoothly when the battery is connected to the cooling fan motor RH connector.
    3. Measure the current while the cooling fan motor RH is operating.

      Standard Current

      Condition Specified Condition
      Battery voltage applied at 20°C (68°F) 6.6 to 10.7 A

      If the result is not as specified, replace the cooling fan motor RH.

    4. Connect the cooling fan motor RH connector.
scientia non olet · About LEMON Manuals