LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transmission System (Aa81E) - Service Information (1 Of 2)) >> VALVE BODY ASSEMBLY (for 2GR) >> Inspection [09/2014 - ] >> Procedure

Inspection [09/2014 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT SHIFT SOLENOID VALVE (SL1) 
    GTY464575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *a Component without harness connected
    (Shift Solenoid Valve (SL1))
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 20°C (68°F) 5.0 to 5.6 Ω
    2. Connect a positive (+) lead with a 21 W bulb from the battery to terminal 2 and a negative (-) lead to terminal 1 of the shift solenoid valve (SL1) connector and check the operation of the valve.

      OK

      The valve moves and makes an operating sound.

      If the result is not as specified, replace the shift solenoid valve (SL1).

  2. INSPECT SHIFT SOLENOID VALVE (SL2) 

    HINT: 

    Use the same procedure as for the shift solenoid valve (SL1).

  3. INSPECT SHIFT SOLENOID VALVE (SL3) 

    HINT: 

    Use the same procedure as for the shift solenoid valve (SL1).

  4. INSPECT SHIFT SOLENOID VALVE (SL4) 

    HINT: 

    Use the same procedure as for the shift solenoid valve (SL1).

  5. INSPECT SHIFT SOLENOID VALVE (SL5) 

    HINT: 

    Use the same procedure as for the shift solenoid valve (SL1).

  6. INSPECT SHIFT SOLENOID VALVE (SLU) 

    HINT: 

    Use the same procedure as for the shift solenoid valve (SL1).

  7. INSPECT SHIFT SOLENOID VALVE (SLT) 

    HINT: 

    Use the same procedure as for the shift solenoid valve (SL1).

  8. INSPECT SHIFT SOLENOID VALVE (SL) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY468974Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Shift Solenoid Valve (SL))

      Standard Resistance

      Tester Connection Condition Specified Condition
      Shift solenoid valve (SL) connector terminal - Shift solenoid valve (SL) body 20°C (68°F) 11 to 15 Ω
    2. Connect a positive (+) lead from the battery to the terminal of the shift solenoid valve (SL) connector, and a negative (-) lead to the shift solenoid valve (SL) body, and check the operation of the valve.

      OK

      The valve moves and makes an operating sound.

      If the result is not as specified, replace the shift solenoid valve (SL).

  9. INSPECT SHIFT SOLENOID VALVE (SR) 
    1. Measure the resistance according to the value(s) in the table below.
      GTY461450Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Shift Solenoid Valve (SR))

      Standard Resistance

      Tester Connection Condition Specified Condition
      Shift solenoid valve (SR) connector terminal - Shift solenoid valve (SR) body 20°C (68°F) 11 to 15 Ω
    2. Connect a positive (+) lead from the battery to the terminal of the shift solenoid valve (SR) connector, and a negative (-) lead to the shift solenoid valve (SR) body, and check the operation of the valve.

      OK

      The valve moves and makes an operating sound.

      If the result is not as specified, replace the shift solenoid valve (SR).

scientia non olet · About LEMON Manuals