LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transmission System (Aa81E) - Service Information (1 Of 2)) >> Shift Paddle Switch >> Installation [11/2017 - ] >> Procedure

Installation [11/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NO. 1 SWITCH WIRE 

    HINT: 

    Perform this procedure only when replacement of the No. 1 switch wire is necessary.

    1. Engage the 4 guides to install the No. 1 switch wire to the lower steering wheel boss cover.
      NOTE:

      If the heater thermistor comes off the lower steering wheel cover, replace the steering wheel assembly.

    2. Install steering vibration and heater ECU.

      Refer to PROCEDURE - Step 1

    3. Install steering pad switch assembly.

      Refer to PROCEDURE - Step 1

    4. Install cruise control main switch.

      Refer to PROCEDURE - Step 1

  2. INSTALL SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) 
    1. Connect the 2 shift paddle switch (transmission shift switch assembly) connectors to install the 2 shift paddle switches (transmission shift switch assemblies) to the No. 1 switch wire.
    2. Engage the 4 claws and 2 guides to connect the 2 shift paddle switches (transmission shift switch assemblies) to the steering wheel assembly.
    3. Install 4 new screws.

      Torque: 1.7 N.m (17 kgf/cm, 15 in.lbf) 

  3. INSTALL STEERING WHEEL ASSEMBLY 

    Refer to INSTALLATION [11/2017 - ]

scientia non olet · About LEMON Manuals