LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Automatic Transmission System (Aa81E) - Service Information (1 Of 2)) >> SPEED SENSOR (for 8AR-FTS) >> Removal [10/2015 - ] >> Procedure

Removal [10/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2024 Lexus RC 350, 2024 Lexus RC 300, 2023 Lexus RC 350, 2023 Lexus RC 300, and 2022 Lexus RC 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to REMOVAL [10/2015 - ] 

  2. REMOVE TRANSMISSION REVOLUTION SENSOR (NC3) 
    GTY654790Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the transmission revolution sensor (NC3) connector.
    2. Remove the bolt and transmission revolution sensor (NC3) from the automatic transmission case sub-assembly.
  3. REMOVE TRANSMISSION REVOLUTION SENSOR (NT) 
    GTY681813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the transmission revolution sensor (NT) connector.
    2. Using a T30 "TORX" socket wrench, remove the bolt and transmission revolution sensor (NT) from the automatic transmission case sub-assembly.
  4. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2) 
    GTY654788Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the transmission revolution sensor (SP2) connector.
    2. Remove the bolt and transmission revolution sensor (SP2) from the automatic transmission case sub-assembly.
scientia non olet · About LEMON Manuals