LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> RC 300 F Sport >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (2GR-FSE) - Service Information >> Oil Pressure Switch >> Removal [09/2014 - 11/2017] >> Procedure

Removal [09/2014 - 11/2017]: Procedure

  1. REMOVE ENGINE ROOM SIDE COVER 

    Refer to PROCEDURE - Step 1

  2. REMOVE COOL AIR INTAKE DUCT SEAL 

    Refer to PROCEDURE - Step 2

  3. REMOVE INLET NO. 1 AIR CLEANER 

    Refer to PROCEDURE - Step 20 [09/2014 - 10/2015] , or refer to PROCEDURE - Step 20 [10/2015 - 11/2017]

  4. DRAIN ENGINE OIL 

    See step  1 [09/2014 - 10/2015], or see step  1 [10/2015 - 11/2017]

  5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY 
    1. Disconnect the engine oil pressure switch assembly connector.
    2. Using a 24 mm deep socket wrench, remove the engine oil pressure switch assembly.
      GTY515277Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for 2WD
      *B for AWD
scientia non olet · About LEMON Manuals