DTC B15F6: Main Body ECU Vehicle Information Reading/Writing Process Malfunction [11/2017 - 10/2018]: Procedure

1. Use the Techstream to check if the CAN communication system is functioning normally.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [11/2017 - 10/2018]

   OK

   CAN communication DTCs are not output.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO CAN COMMUNICATION SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2017 - 10/2018] 

Result: 

OK 

See step  2

1. Check if the power door lock control system is malfunctioning.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ]

   HINT: 

   Customization may not be possible depending on the malfunction in the power door lock control system.

   OK

   No malfunctions are present in the power door lock control system.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO POWER DOOR LOCK CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ] 

Result: 

OK 

See step  3

1. Check if the wireless door lock control system is malfunctioning.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ]

   HINT: 

   Customization may not be possible depending on the malfunction in the wireless door lock control system.

   OK

   No malfunctions are present in the wireless door lock control system.

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ] 

Result: 

OK 

See step  4

1. Check if the lighting system (for Interior) is malfunctioning.

   Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ]

   HINT: 

   Customization may not be possible depending on the malfunction in the lighting system (for Interior).

   OK

   No malfunctions are present in the lighting system (for Interior).

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO LIGHTING SYSTEM (for Interior). Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - ] 

Result: 

OK 

See step  5

1. Check if the lighting system (for Exterior) is malfunctioning.

   for Triple Beam Headlight: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2018]

   for Single Beam Headlight: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2018]

   HINT: 

   Customization may not be possible depending on the malfunction in the lighting system (for Exterior).

   OK

   No malfunctions are present in the lighting system (for Exterior).

   Result

   Proceed to
   OK
   NG

Result: 

NG 

GO TO LIGHTING SYSTEM (for Exterior) 

for Triple Beam Headlight: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2018]

for Single Beam Headlight: Refer to HOW TO PROCEED WITH TROUBLESHOOTING [09/2014 - 10/2018]

Result: 

OK 

See step  6

1. Display the "Vehicle Customization" screen.
2. Make a note of the customizable items for each main body ECU (multiplex network body ECU) related system.

   HINT: 

   The items shown as customizable via the audio and visual system vehicle customization screen can also be changed using the Techstream. In the following steps, the Techstream will be used.

   1. To match-up the items on the multi-display assembly with the items on the Techstream, check the customize parameters list for the power door lock control system related items that can be customized via the multi-display assembly screen.

      Refer to CUSTOMIZE PARAMETERS [11/2017 - ]

   2. To match-up the items on the multi-display assembly with the items on the Techstream, check the customize parameters list for the wireless door lock control system related items that can be customized via the multi-display assembly screen.

      Refer to CUSTOMIZE PARAMETERS [11/2017 - ]

   3. To match-up the items on the multi-display assembly with the items on the Techstream, check the customize parameters list for the lighting system (for Interior) related items that can be customized via the multi-display assembly screen.

      Refer to CUSTOMIZE PARAMETERS [11/2017 - 10/2018]

   4. To match-up the items on the multi-display assembly with the items on the Techstream, check the customize parameters list for the lighting system (for Exterior) related items that can be customized via the multi-display assembly screen.
      1. for Triple Beam Headlight: Refer to CUSTOMIZE PARAMETERS [11/2017 - 10/2018]

         for Single Beam Headlight: Refer to CUSTOMIZE PARAMETERS [11/2017 - 10/2018]

3. Using the Techstream, check that it is possible to change the settings of the customize parameters that are available for customization via the multi-display assembly screen.

   OK

   The items available for customization via the multi-display assembly screen can be customized successfully using the Techstream.

   Result

   Proceed to
   OK
   NG

Result: 

OK 

REPLACE RADIO RECEIVER ASSEMBLY. Refer to  REMOVAL [11/2017 - 10/2018] 

Result: 

NG 

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to  REMOVAL [09/2014 - ]