Inspection [09/2015 - ]: Procedure

INSPECT CLOCK ASSEMBLY

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Check the illumination.

Apply battery voltage to the connector and check the illumination condition.

Measurement Condition	Specified Condition
Battery positive (+) → Terminal 1 (B) Battery positive (+) → Terminal 2 (ACC) Battery negative (-) → Terminal 7 (E) Battery negative (-) → Terminal 8 (ILL-)	Illuminates

If the result is not as specified, replace the clock assembly.

TEXT IN ILLUSTRATION

* a	Component without harness connected (Clock Assembly)