LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> LS 460 L, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio / Video System (Service Information) >> Instrument Panel Speaker >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY 
    1. Connect the connector.
    2. Temporarily install the front No. 2 speaker assembly by aligning the positioning pins of the front No. 2 speaker assembly with the instrument panel.
    3. Install the front No. 2 speaker assembly with the 2 bolts.
      NOTE:
      • Do not touch the cone part of the speaker.
      • When installing the speaker to the instrument panel be careful so that the wires do not get caught between the parts.
  2. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY 
    1. Attach the 2 clips and 7 claws to install the No. 1 instrument panel speaker panel sub-assembly.
  3. INSTALL FRONT PILLAR GARNISH LH 

    Refer to PROCEDURE - Step 33

  4. INSTALL FRONT NO. 3 SPEAKER ASSEMBLY 
    1. Connect the connector.
    2. Temporarily install the front No. 3 speaker assembly by aligning the positioning pins of the front No. 3 speaker assembly with the instrument panel.
    3. Install the front No. 3 speaker assembly with the 2 bolts.
      NOTE:
      • Do not touch the cone part of the speaker.
      • When installing the speaker to the instrument panel be careful so that the wires do not get caught between the parts.
  5. INSTALL NO. 1 SPEAKER HOLE COVER 
    1. Attach the 4 clips, claw and clamp to install the No. 1 speaker hole cover.
scientia non olet · About LEMON Manuals