LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> LS 460 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Navigation System - Service Information >> Navigation Antenna >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

  1. INSTALL NAVIGATION ANTENNA ASSEMBLY 
    1. Attach the 4 clamps.
    2. Install the navigation antenna assembly with the 2 screws.
  2. INSTALL NO. 3 HEATER TO REGISTER DUCT 

    Refer to PROCEDURE - Step 13

  3. INSTALL DEFROSTER NOZZLE ASSEMBLY 

    Refer to PROCEDURE - Step 12

  4. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT 

    Refer to PROCEDURE - Step 15

  5. INSTALL INSTRUMENT PANEL SAFETY PAD SUBASSEMBLY 

    (Refer to INSTALLATION [09/2015 - ] )

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Refer to INITIALIZATION [09/2015 - ] ).

  7. INSTALL COWL TOP VENTILATOR LOUVER RH 

    Refer to PROCEDURE - Step 15

  8. CHECK SRS WARNING LIGHT 

    (Refer to DIAGNOSIS SYSTEM [09/2015 - ] )

scientia non olet · About LEMON Manuals