LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Engine Starting System (4GR-FSE) - Service Information) >> Relay >> On-Vehicle Inspection [04/2013 - 08/2015] >> Procedure

On-Vehicle Inspection [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ST RELAY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY447534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard Resistance

      Tester Connection Condition Specified Condition
      3 - 5 Battery voltage not applied between terminals 1 and 2 10 kΩ or higher
      Battery voltage applied between terminals 1 and 2 Below 1 Ω

      If the resistance is not as specified, replace the ST relay.

scientia non olet · About LEMON Manuals