On-Vehicle Inspection [04/2013 - 08/2015]: Procedure
WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK COOLING FAN MOTOR
- Disconnect the cooling fan motor connector.
- Check that the cooling fan motor operates smoothly when the battery is connected to the cooling fan motor connector.
*a Component without harness connected
(Cooling Fan Motor) - Measure the current while the cooling fan motor is operating.
Standard Current
Condition Specified Condition Battery voltage applied at 20°C (68°F) 7.8 to 13.8 A If the result is not as specified, replace the cooling fan motor.
- Connect the cooling fan motor connector.
- CHECK NO. 2 COOLING FAN MOTOR
- Disconnect the No. 2 cooling fan motor connector.
- Check that the No. 2 cooling fan motor operates smoothly when the battery is connected to the No. 2 cooling fan motor connector.
*a Component without harness connected
(No. 2 Cooling Fan Motor) - Measure the current while the No. 2 cooling fan motor is operating.
Standard Current
Condition Specified Condition Battery voltage applied at 20°C (68°F) 7.8 to 13.8 A If the result is not as specified, replace the No. 2 cooling fan motor.
- Connect the No. 2 cooling fan motor connector.