LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Lubrication System (4GR-FSE) - Service Information) >> Oil Pump >> Reassembly [04/2013 - 08/2015] >> Procedure

Reassembly [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL OIL PUMP ROTOR SET 
    1. Coat the oil pump rotor set with engine oil and place them into the timing chain cover sub-assembly with the marks facing up (oil pump cover side). Check that the oil pump rotor set rotates smoothly.
      GTY467182Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Mark
  2. INSTALL OIL PUMP COVER 
    1. Install the oil pump cover with the 8 bolts.
      GTY453094Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 9.1 N.m (93 kgf/cm, 81 in.lbf) 

      BOLT LENGTH

      Item Length
      Bolt A 22 mm (0.866 in.)
      Bolt B 40 mm (1.57 in.)
  3. INSTALL OIL PUMP RELIEF VALVE 
    1. Coat the oil pump relief valve with engine oil.
    2. Insert the oil pump relief valve and oil pump relief valve spring into the oil pump cover hole.
    3. Using a 27 mm socket wrench, install the oil pump relief valve plug.

      Torque: 49.1 N.m (501 kgf/cm, 36 ft.lbf) 

scientia non olet · About LEMON Manuals