LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Lubrication System (4GR-FSE) - Service Information) >> Oil Level Sensor >> Inspection [04/2013 - 08/2015] >> Procedure

Inspection [04/2013 - 08/2015]: Procedure

WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT ENGINE OIL LEVEL SENSOR 
    1. Measure the resistance according to the value(s) in the table below.
      GTY469499Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Engine Oil Level Sensor)
      *b ON
      *c OFF

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 - 2 ON Below 1 Ω
      OFF 1 kΩ or higher

      If the result is not as specified, replace the engine oil level sensor.

scientia non olet · About LEMON Manuals