Inspection [04/2013 - 08/2015]: Procedure
WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FUEL INJECTOR ASSEMBLY
NOTE:
This inspection aims at checking the fuel injector assembly for an open or short. Because the fuel injector assemblies of this vehicle are a high-pressure type, fuel injection volume cannot be checked.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
| Tester Connection |
Condition |
Specified Condition |
| 1 - 2 |
20°C (68°F) |
2.01 to 2.31 Ω |
If the result is not as specified, replace the fuel injector assembly.