Typical Enabling Conditions
WARNING: This page is about a different car, the 2015 Lexus IS 250 and 2014 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
ALL
| The monitor will run whenever this DTC is not present. |
None |
| Engine Switch |
on (IG) |
| Starter |
OFF |
CONDITION (A)
| Solenoid current cut status |
Not cut |
| Battery voltage |
11 V or more |
| Target current |
0.1 A or higher |
CONDITION (B)
| Battery voltage |
8 V or more |