LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Automatic Transmission System (Aa80E) - Service Information) >> Speed Sensor >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to REMOVAL [11/2021 - ] 

  2. REMOVE TRANSMISSION REVOLUTION SENSOR (NC3) 
    GTY467240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the transmission revolution sensor (NC3) connector.
    2. Remove the bolt and transmission revolution sensor (NC3) from the automatic transmission case sub-assembly.
  3. REMOVE TRANSMISSION REVOLUTION SENSOR (NT) 
    GTY470944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the transmission revolution sensor (NT) connector.
    2. Using a T30 "TORX" socket wrench, remove the bolt and transmission revolution sensor (NT) from the automatic transmission case sub-assembly.
  4. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2) 
    GTY467238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the transmission revolution sensor (SP2) connector.
    2. Remove the bolt and transmission revolution sensor (SP2) from the automatic transmission case sub-assembly.
scientia non olet · About LEMON Manuals