Inspection [11/2021 - ]: Procedure
WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Shift Paddle Switch (Transmission Shift Switch Assembly) LH)Standard Resistance
SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) LH:Tester Connection Condition Specified Condition 2 (ECC) - 1 (SDN) "-" continuously pulled Below 2.5 Ω Released 1 MΩ or higher If the result is not as specified, replace the shift paddle switch (transmission shift switch assembly) LH.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) RH:Tester Connection Condition Specified Condition 3 (SUP) - 2 (ECC) "+" continuously pulled Below 2.5 Ω Released 1 MΩ or higher *a Component without harness connected
(Shift Paddle Switch (Transmission Shift Switch Assembly) RH)If the result is not as specified, replace the shift paddle switch (transmission shift switch assembly) RH.
- Measure the resistance according to the value(s) in the table below.