LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Automatic Transmission System (Aa80E) - Service Information) >> Oil Pump >> Reassembly [11/2021 - ] >> Procedure

Reassembly [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FRONT OIL PUMP OIL SEAL 
    1. Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.
      GTY465514Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      • SST: 09350-30020 
        1. 09351-32140

      Standard Depth

      -0.2 to 0.2 mm (-0.00787 to 0.00787 in.)

      HINT: 

      The front oil pump oil seal end should be flush with the outer edge of the front oil pump body sub-assembly.

    2. Coat the lip of the front oil pump oil seal with MP grease.
  2. SECURE FRONT OIL PUMP BODY SUB-ASSEMBLY 
    1. Install the front oil pump body sub-assembly to the torque converter assembly.
  3. INSTALL FRONT OIL PUMP DRIVEN GEAR 
    GTY458036Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *1 Front Oil Pump Driven Gear
    1. Coat the front oil pump driven gear with ATF.
    2. Install the front oil pump driven gear to the front oil pump body sub-assembly.
  4. INSTALL FRONT OIL PUMP DRIVE GEAR 
    GTY467075Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *1 Front Oil Pump Drive Gear
    1. Coat the front oil pump drive gear with ATF.
    2. Install the front oil pump drive gear to the front oil pump body sub-assembly.
  5. INSTALL FRONT OIL PUMP BODY O-RING 
    GTY463892Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *1 Front Oil Pump Body O-ring
    1. Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.
  6. INSTALL STATOR SHAFT ASSEMBLY 
    1. Align the matchmarks, and install the stator shaft assembly to the front oil pump body sub-assembly quickly.
      GTY508356Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Matchmark
    2. Using a T30 "TORX" socket wrench, install the 2 bolts.
      GTY467058Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Torque: 10.8 N.m (110 kgf/cm, 8 ft.lbf) 

  7. INSTALL STATOR SHAFT CLUTCH DRUM THRUST WASHER 
    1. Align the 2 claws and install the stator shaft clutch drum thrust washer to the stator shaft assembly.
      GTY466186Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Stator Shaft Clutch Drum Thrust Washer
  8. INSTALL STATOR SHAFT PISTON 
    GTY469375Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    *1 O-ring
    1. Coat 2 new O-rings with ATF and install them to the stator shaft piston.
    2. Install the stator shaft piston and stator shaft spring sub-assembly to the oil pump assembly.
      GTY462980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Stator Shaft Spring Sub-assembly
      *2 Stator Shaft Piston
    3. Using a T30 "TORX" socket wrench, install the 5 bolts.

      Torque: 10.8 N.m (110 kgf/cm, 8 ft.lbf) 

  9. INSPECT FRONT OIL PUMP DRIVE GEAR ROTATION 

    See step  5

  10. INSTALL CLUTCH DRUM OIL SEAL RING 
    1. Coat 4 new clutch drum oil seal rings with ATF.
      NOTE:

      Do not expand the gap of the clutch drum oil seal rings excessively.

    2. Install the 4 clutch drum oil seal rings to the oil pump assembly.
      GTY461087Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      HINT: 

      After installing the clutch drum oil seal rings, check that they rotate smoothly.

  11. INSTALL OIL PUMP O-RING 
    1. Coat a new oil pump O-ring with ATF and install it to the oil pump assembly.
      GTY470885Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *1 Oil Pump Assembly
      *2 Oil Pump O-ring
scientia non olet · About LEMON Manuals