LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Automatic Transmission System (Aa80E) - Service Information) >> Kick-Down Switch >> Inspection [11/2021 - ] >> Procedure

Inspection [11/2021 - ]: Procedure

WARNING: This page is about a different car, the 2024 Lexus IS 500, 2023 Lexus IS 500, and 2022 Lexus IS 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSPECT KICK DOWN SWITCH ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.
      GTY499595Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (Kick Down Switch Assembly)

      Standard Resistance

      Tester Connection Condition Specified Condition
      1 (E) - 2 (KD) Pushed (ON) Below 1 Ω
      Released (OFF) 10 kΩ or higher

      If the result is not as specified, replace the kick down switch assembly.

scientia non olet · About LEMON Manuals