Inspection [04/2013 - ]: Procedure
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT SHIFT PALLDE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY)
- Measure the resistance according to the value(s) in the table below.
*a Component without harness connected
(Shift Paddle Switch [Transmission Shift Switch Assembly] LH)Standard Resistance
SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) LH:Tester Connection Switch Condition Specified Condition 2 (ECC) - 1 (SDN) "-" continuously pulled Below 2.5 Ω Released 1 MΩ or higher If the resistance values are not as specified, replace the shift paddle switch (transmission shift switch assembly) LH.
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) RH:Tester Connection Switch Condition Specified Condition 3 (SUP) - 2 (ECC) "+" continuously pulled Below 2.5 Ω Released 1 MΩ or higher *a Component without harness connected
(Shift Paddle Switch [Transmission Shift Switch Assembly] RH)If the resistance values are not as specified, replace the shift paddle switch (transmission shift switch assembly) RH.
- Measure the resistance according to the value(s) in the table below.