LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transmission System (Aa81E) - Service Information (1 Of 2)) >> Shift Lever >> Reassembly [09/2020 - ] >> Procedure

Reassembly [09/2020 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SHIFT POSITION INDICATOR 
    1. Install the shift position indicator to the console panel sub-assembly with the screw.
      GTY968856Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the clamp and guide to the console panel sub-assembly.
      GTY968813Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Clamp
      *b Guide
  2. INSTALL REMOTE OPERATION CONTROLLER ASSEMBLY 

    Refer to PROCEDURE - Step 1

  3. INSTALL SHIFT LEVER PLATE SUB-ASSEMBLY 
    1. Engage the 2 claws to install the shift lever plate sub-assembly to the shift position indicator.
      GTY458417Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals