LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2017 >> IS 300 F Sport >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Automatic Transmission System (Aa81E) - Service Information (1 Of 2)) >> SPEED SENSOR (for 2GR) >> Removal [04/2013 - ] >> Procedure

Removal [04/2013 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to REMOVAL [04/2013 - 10/2016] , or refer to REMOVAL [10/2016 - ] 

  2. REMOVE TRANSMISSION REVOLUTION SENSOR NC3 
    GTY467240Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector from the transmission revolution sensor NC3.
    2. Remove the bolt and transmission revolution sensor NC3 from the automatic transmission case sub-assembly.
  3. REMOVE TRANSMISSION REVOLUTION SENSOR NT 
    GTY470944Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector from the transmission revolution sensor NT.
    2. Using "TORX" socket wrench T30, remove the bolt and transmission revolution sensor NT from the oil pump assembly.
    3. Remove the O-ring from the transmission revolution sensor NT.
  4. REMOVE TRANSMISSION REVOLUTION SENSOR SP2 
    GTY467238Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Disconnect the connector from the transmission revolution sensor SP2.
    2. Remove the bolt and transmission revolution sensor SP2 from the automatic transmission case sub-assembly.
scientia non olet · About LEMON Manuals