Installation [04/2013 - 09/2020]: Procedure

WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2024 Lexus IS 350, 2024 Lexus IS 300, 2023 Lexus IS 350, 2023 Lexus IS 300, and 2022 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CLIP
HINT:

Perform this procedure only when replacement of the clip is necessary.
1. Install the 4 clips to the combination switch assembly.
INSTALL COMBINATION SWITCH ASSEMBLY
1. Engage the 7 claws to install the combination switch assembly to the upper console panel sub-assembly.
INSTALL LEXUS DISPLAY AUDIO CONTROLLER (for Radio and Display Type)
Refer to PROCEDURE - Step 1
INSTALL REMOTE TOUCH (for Multi-Media Module Receiver Type)
Refer to PROCEDURE - Step 1 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 1 [10/2016 - 09/2020]
INSTALL CONSOLE PANEL SUB-ASSEMBLY
Refer to PROCEDURE - Step 7 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 6 [10/2016 - 09/2020]
INSTALL FRONT PANEL GARNISH LH
Refer to PROCEDURE - Step 11 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 10 [10/2016 - 09/2020]
INSTALL FRONT PANEL GARNISH RH
Refer to PROCEDURE - Step 10 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 9 [10/2016 - 09/2020]
INSTALL INSTRUMENT PANEL FINISH PANEL END LH
Refer to PROCEDURE - Step 13 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 12 [10/2016 - 09/2020]
INSTALL INSTRUMENT PANEL FINISH PANEL END RH
Refer to PROCEDURE - Step 12 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 11 [10/2016 - 09/2020]
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Refer to PROCEDURE - Step 14 [04/2013 - 10/2016] , or refer to PROCEDURE - Step 13 [10/2016 - 09/2020]